[WIRED TUTORIAL] Anti-line cutting

[Someone]

Declaimer: This thread was originally featured on another discussion board.


Hate it when users can cut lines by going diagonal on the corner? Let's stop them!

Wired Required:

• 1x WIRED Condition: Furni has users
• 1x WIRED Effect: Teleport to furni
• 1x WIRED Trigger: User Walks Off Furni

1. Place all the wired into one pile
   

1. Double click the 'WIRED Effect: Teleport to furni' and select the start of the line (red tile in this example)
   
   

1. Double click the 'WIRED Trigger: User walks off furni' and select the roller BEFORE the corner roller!
   

1. Double click the 'WIRED Condition: Furni has users' and select the corner roller!
   

1. And that's it! So easy. Remember if you have more than 1 corners, each corner needs it's own wired stack, you cannot duplicate rollers per stack!

[Kingsman]

Thanks for the tutorial! Pretty time consuming to do this, but walk through is on. You can set wired for walk throughs as well, if we aren't that lazy to.