[WIRED TUTORIAL] Anti-line cutting

Declaimer: This thread was originally featured on another discussion board.


Hate it when users can cut lines by going diagonal on the corner? Let's stop them!

Attachment 216

Wired Required:

• 1x WIRED Condition: Furni has users
• 1x WIRED Effect: Teleport to furni
• 1x WIRED Trigger: User Walks Off Furni

1. Place all the wired into one pile
   Attachment 216

1. Double click the 'WIRED Effect: Teleport to furni' and select the start of the line (red tile in this example)
   Attachment 217
   Attachment 218

1. Double click the 'WIRED Trigger: User walks off furni' and select the roller BEFORE the corner roller!
   Attachment 220

1. Double click the 'WIRED Condition: Furni has users' and select the corner roller!
   Attachment 219

1. And that's it! So easy. Remember if you have more than 1 corners, each corner needs it's own wired stack, you cannot duplicate rollers per stack!

Thanks for the tutorial! Pretty time consuming to do this, but walk through is on. You can set wired for walk throughs as well, if we aren't that lazy to.